Craftsman 28947 Operation Manual - Page 26

TO REMOVE, MOWER, attachment

Get Craftsman 28947 - GT 5000 26 HP/54inch Garden Tractor PDF manuals and user guides View all Craftsman 28947 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

_ ADAJRUNSITNMGE: NTTSO: AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR 1. Depress clutch/brake pedal fully and set parking brake. 3, Place attachment clutch in "DISENGAGED" position. 4. Turn ignition key to "STOP" and remove key, 5. Make sure the blades and all moving parts have completely stopped. 6. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TO REMOVE MOWER 1. Place attachment clutch in "DISENGAGED" position. 2o Lower attachment lift lever to its lowest position. 3. Disengage belt tension rod (K) from lock bracket (L). CAUTION: Belt tension rod is spring loaded, Have a tight grip on rod and release slowly. 4. Remove mower belt from electric clutch pulley (M), 5. Disconnect front link (E) from mower - remove retainer spring and washer. 6. Go to either side of mower and disconnect mower suspension arm (A) from chassis and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers, 7. Go to other side of mower and disconnect the suspension arm and rear lift link, _, CAUTION: After rear lift links are discon- nected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever, 8, From right side of mower, disconnect anti-sway bar (S) from right rear mower bracket (D) - remove retainer spring and washer and pull mower toward you until the bar falls from the hole in bracket. 9. Turn tractor steering wheel to the left as far as it will goo 10. Slide mower out from under right side of tractor, TO INSTALL MOWER Follow procedure described in "INSTALL MOWER AND DRIVE BELT" in the Assembly section of this manual. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
_
ARNING:
TO AVOID SERIOUS INJURY, BEFORE
PERFORMING
ANY SERVICE OR
ADJUSTMENTS:
1.
Depress
clutch/brake
pedal fully and set parking brake.
3,
Place attachment
clutch
in
"DISENGAGED"
position.
4.
Turn ignition key to
"STOP"
and remove
key,
5.
Make
sure the blades and
all moving
parts have completely
stopped.
6.
Disconnect
spark
plug wire from spark plug and place wire where
it cannot
come
in contact
with plug.
TO REMOVE
MOWER
1.
Place
attachment
clutch
in
"DISEN-
GAGED"
position.
2o
Lower
attachment
lift lever
to
its lowest
position.
3.
Disengage
belt tension
rod (K) from
lock
bracket
(L).
CAUTION:
Belt
tension
rod
is
spring
loaded,
Have
a tight
grip on rod and release
slowly.
4.
Remove
mower
belt from
electric
clutch
pulley
(M),
5.
Disconnect
front
link
(E) from
mower
-
remove
retainer
spring
and washer.
6.
Go
to
either side of mower and disconnect
mower
suspension
arm
(A) from
chas-
sis and
rear lift link
(C) from
rear
mower
bracket
(D) - remove
retainer
springs
and
washers,
7.
Go to other side of mower
and disconnect
the suspension
arm
and
rear
lift link,
_,
CAUTION:
After
rear lift
links
are discon-
nected, the attachment
lift lever will be spring
loaded.
Have
a tight
grip
on lift lever
when
changing
position
of the lever,
8,
From
right
side
of
mower,
disconnect
anti-sway
bar (S) from
right
rear
mower
bracket
(D) - remove
retainer
spring
and
washer
and pull mower
toward
you until
the bar falls from
the hole
in
bracket.
9.
Turn tractor
steering
wheel
to the left as
far
as it will goo
10. Slide
mower
out from
under
right
side
of
tractor,
TO
INSTALL
MOWER
Follow
procedure
described
in
"INSTALL
MOWER AND DRIVE BELT" in the Assembly
section
of this manual.
26