Craftsman 28947 Operation Manual - Page 8
Operation, controls, TO iNSTALL MOWER - tools
View all Craftsman 28947 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
"(our new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness, TOOLS REQUIIRED FOR ASSEMBLY 2. Lift up adjustment lever (A) and slide seat A socket wrench set will make assembly easier. Standard wrench sizes are listed, until a comfortable position is reached which allows you to press clutch/brake (2) 7/16" wrenches Utility knife (1) 1/2" wrench Tire pressure gauge pedal all the way down. 3. Release lever to lock seat in position. (1) 3/4" wrench Pliers (1) 3/4" socket w/drive ratchet (1) 9/16" wrench Flashlight When right or left hand is mentioned in this manual, it meanswhenyou are intheoperating position (seated behind the steering wheel), TO REMOVE TRACTOR FROM CARTON UNPACK CARTON • Remove all accessible loose parts and parts cartons from carton, - Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat. - Remove mower and packing materials. = Check for any additional loose parts or cartons and remove, BEFORE REMOVING FROM SKID TO CHECK BATTERY TRACTOR 1. Lift hood to raised position, NOTE: If this battery is put into service after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions). = Forbatteryandbatterycableinstallationsee "REPLACING BATTERY" in the "Service and Adjustments" section in this manual, Label NOTE: You may now roll your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid° WARNING; Before starting, read, understand and follow all instructions in the Operation section of this manual Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects. TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls) 1. Raise attachment lift lever to its highest position. 2. Release parking brake by depressing brake pedal. 3. Place freewheel control in disengaged position to disengage transmission (See "TO TRANSPORT" in the Operation section of this manual). 4. Roll tractor forward off skid. TO iNSTALL MOWER 1. SET PARKING BRAKE LEVER AND LOWER ATTACHMENT LIFT LEVER • Depress clutch/brake pedal all the way down and hold. Pull parking brake lever up and hold, release pressure from clutch/brake pedal, then release parking brake lever. Pedal should remain in brake position, Ensure parking brake will hold tractor secure. ADJUST SEAT 1. Sit in seat. 8