Craftsman 7-1/4 Operation Manual - Page 7
Warnin, Warning - circular saw blades
View all Craftsman 7-1/4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ELECTRICALSAFETY I i/n_staWlliAngRNoIrNremGo:vinDgo tnhoet ppleurgmiftrofmingtehres otuotlteotu. ch the terminals of plug when 1. Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way, If the plug does not fit fully In the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. 2. Double Insulation [] eliminates the need for the three-wire grounded power cord and grounded power supply system. Applicable only to Class It (double-insulated) tools. This circular saw is Cover of a double Insulated tool. Grounded ® Outlet Box ----" (_ /_ WARNING: Double insulation DOES NOT take the place of normal safety precautions when operating this tool, 3. BEFORE plugging in the tool, BE SURE that the outlet voltage supplied is within the voltage marked on the tool's data plate. DO NOT use "AC only" rated tools with a DC power supply, 4,, AVOID body contact with grounded surfaces, such as pipes, radiators, ranges and refrigerators, There is an increased risk of electric shock if your body is grounded. 5. DO NOT expose power tools to rain or wet conditions or use power tools in wet or damp locations. Water entering a power tool will increase the risk of electric shock. 6. INSPECT tool cords for damage. Have damaged toot cords repaired at a Sears Service Center. BE SURE to stay constantly aware of the cord location and keep it well away from the moving blade. 7. DO NOT abuse the cord. NEVER use the cord to carry the toot by or pull the plug from the outlet. Keep cord away from heat, oil, sharp edges or moving parts, Replace damaged cords immediately. Damaged cords increase the risk of electric shock.