Cub Cadet 221 LHP 221 LHP Operator's Manual - Page 11

Controls & Features Headlight Chute Tilt Control Recoil Starter Handle Chute Assembly 4 Auger Control Chute Rotation Control Auger Shave Plate NOTE: This Operator's Manual covers several models. Snow thrower features may vary by model. Not all features in this manual are applicable to all snow thrower models and the snow thrower depicted may differ from yours. NOTE: All references to the left or right side of the snow thrower are from the operator's position. Any exceptions will be noted. Chute Tilt Control (Model 221 LHP) The chute tilt control is located to the right of the control panel and controls the angle/distance that snow is thrown. Pull back on the chute tilt control to increase the angle/distance and push forward to decrease the angle/distance. Headlight (Model 221 LHP) Chute Rotation Control (Model 221 LHP) The headlight is located on the upper center of the control panel and is on when the snow thrower is running. Recoil Starter Handle The chute rotate control is located in the center of the control panel and controls the direction snow is thrown. Depress the button and rotate the chute rotation control to the right to turn the chute to the right and rotate to the left to turn the chute to the left. The recoil starter handle is used to manually start the engine. Auger EZ Chute (Model 221 HP) When engaged, the auger rotation draws snow into the auger The rotation of the chute is controlled by rotating the chute control handle left or right. The angle/distance that snow is thrown is changed by manually tilting the upper chute to the desired position. housing and throws it out the discharge chute. Rubber paddles on the auger also aid in propelling the snow thrower as they come in contact with the pavement. Shave Plate Auger Control The shave plate maintains contact with the pavement as the snow thrower is propelled, allowing snow close to the pavement's surface to be discharged. Located on the upper handle, the auger control is used to engage and disengage drive to the auger. Squeeze the control against the upper handle to engage the auger; release it to disengage. 11