D-Link DAP-2330 User Manual - Page 8
Basic Installation, Hardware Setup, Method 1 - PoE with PoE Switch
View all D-Link DAP-2330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Section 2 - Installation Basic Installation Hardware Setup To power the access point, you can use one of the following 3 methods: Method 1 - Use if you have a PoE switch or router. Method 2 - Use if you do not have a PoE switch or router and do not have a power outlet near the location of the access point. Method 3 - Use if you do not have a PoE switch or router and have a power outlet near the location of the access point. Method 1 - PoE with PoE Switch 1. Connect one end of your Ethernet cable to the LAN (PoE) port on the access point. 2. Connect the other end into one port on a PoE switch. DAP-2330 PoE Switch or Router D-Link DAP-2330 User Manual 8
Section 2 - Installation
D-Link DAP-2330 User Manual
8
Basic Installation
Hardware Setup
To power the access point, you can use one of the following 3 methods:
Method 1
- Use if you have a PoE switch or router.
Method 2
- Use if you do not have a PoE switch or router and do not have a power outlet near the location of the access point.
Method 3
- Use if you do not have a PoE switch or router and have a power outlet near the location of the access point.
DAP-2330
PoE Switch or Router
Method 1 - PoE with PoE Switch
1. Connect one end of your Ethernet cable to the LAN (PoE) port on the access point.
2. Connect the other end into one port on a PoE switch.