D-Link DAP-2553 Product Manual - Page 24
Wireless Client mode, Wireless Band - d link default password
UPC - 790069318191
View all D-Link DAP-2553 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Section 3 - Configuration Wireless Client mode Wireless Band: Select either 2.4GHz or 5GHz from the drop-down menu. Mode: Wireless Client is selected from the drop-down menu. Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN).The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network. SSID Visibility: This option is unavailable in Wireless Client mode. Auto Channel Enabling this feature automatically selects the channel that will Selection: provide the best wireless performance. This feature is not supported in Wireless Client mode. Channel: The channel used will be displayed, and matches the AP that the DAP-2553 is connected to when set to Wireless Client mode. Channel Width: Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz. Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Use the drop-down menu to choose Open System or WPA-Personal. Authentication: Select Open System to communicate the key across the network. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Enable: Check to enable clone MAC.This feature will allow you to change the MAC address of the access point to the MAC address of a client. MAC Source: Select the MAC source from the drop-down menu. MAC Address: Enter the MAC address that you would like to assign to the access point. D-Link DAP-2553 User Manual 24