D-Link DAP-2553 Product Manual - Page 42

Section 3 - Configuration AP Array An AP array is a set of devices on a network that are organized into a single group to increase ease of management. Enable Array: This check box allows the user to enable the AP array function. The three modes that are available are Master, Backup Master, and Slave. APs in the same array will use the same configuration. The configuration will sync the Master AP to the Slave AP and the Backup Master AP when a Slave AP and a Backup Master AP join the AP array. AP Array Name: Enter a name for the AP array you have created. AP Array Enter a password that will be used to access the AP Password: array you have created. Scan AP Array Click this button to initiate a scan of all the available List: APs currently on the network. AP Array List: This table displays the current AP array status for the following parameters: Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total. Current Array This table displays all the current array members. The Members: DAP-2553 AP array feature supports up to eight AP array members. D-Link DAP-2553 User Manual 42