D-Link DCS-950 Product Manual - Page 8

Hardware Overview - port

Get D-Link DCS-950 - Network Camera PDF manuals and user guides
UPC - 790069270710
View all D-Link DCS-950 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

DCS-950 User's Manual Hardware Overview Connections Reset Button Reset will be initiated when the reset button is pressed once and Power LED begins to flash. Factory Reset will be initiated when the reset button is pressed continuously for ten seconds. Release the reset button and the Power LED will begin to flash indicating that the DCS-950's settings are reverting back to the factory settings. The IP address will also return to the default setting of 192.168.0.20. Hardware Overview DC Power Connector The DC power input connector is labeled DC 5V with a single jack socket to supply power to the DCS-950. Ethernet Cable Connector The DCS-950 features an RJ-45 connector for connections to 10BaseT Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5 UTP cable). The port supports the NWay protocol, allowing the DCS-950 to automatically detect or negotiate the transmission speed of the network.The port also supports MDI/X, which allows the use of either straight through or cross-over cables. D-Link Systems, Inc. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
8
DCS-950 User’s Manual
D-Link Systems, Inc.
Hardware Overview
Hardware Overview
Connections
Ethernet Cable Connector
The DCS-950 features an RJ-45
connector for connections to 10Base-
T Ethernet cabling or 100Base-TX
Fast Ethernet cabling (which should
be Category 5 UTP cable). The port
supports the NWay protocol, allowing
the DCS-950 to automatically detect
or negotiate the transmission speed
of the network. The port also supports
MDI/X, which allows the use of
either straight through or cross-over
cables.
DC Power Connector
The DC power input connector is labeled
DC 5V
with a single jack socket to supply
power to the DCS-950.
Reset Button
Reset will be initiated when the reset
button is pressed once and Power LED
begins to flash.
Factory Reset will be initiated when the
reset button is pressed continuously
for ten seconds. Release the reset
button and the Power LED will begin
to flash indicating that the DCS-950’s
settings are reverting back to the factory
settings. The IP address will also return
to the default setting of 192.168.0.20.