D-Link DES-1008PA Product Manual - Page 18

PoE MAX On : When the power output to PDs has reached or exceeded the maximum power budget. No additional PDs connected will be powered. Off : When the system is using less than 46W Blinking When the system power usage is >=56W Ethernet port status LEDs (Ports 1~8) 10/100M Link/ACT: When the 10M LED lights on, the respective port is successfully 10M : connected to 10M Ethernet network. Otherwise, when the 10M LED is blinking, the port is transmitting or receiving data on the Ethernet network. 100M When the 100M LED lights on, the respective port is successfully : connected to 100M Fast Ethernet network. Otherwise, when the 100M LED is blinking, the port is transmitting or receiving data on the Fast Ethernet network. Off : No link. PoE Rule POE Max: this function will help to protect the POE Switch and to stabilize the power transmitting to the powered device (PD). If the system power usage is >= 46, the POE MAX LED will turn on and the system will not provide power to the additional POE PD. This is done to protect the POE Switch itself and to stabilize the power transmitting to the other POE PDs plugged into the Switch. 12