D-Link DES-3010FA-TAA CLI Guide - Page 299
switchport trunk allowed vlan, remove
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 299 highlights
VLAN Commands switchport trunk allowed vlan The switchport trunk allowed vlan Interface Configuration mode command adds or removes VLANs to or from a trunk port. Syntax switchport trunk allowed vlan {add vlan-list | remove vlan-list } Parameters • add vlan-list - List of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. • remove vlan-list - List of VLAN IDs to be removed. Separate nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. Default Configuration This command has no default configuration. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines There are no user guidelines for this command. Example The following example adds VLANs 1, 2, 5 to 6 to the allowed list of Ethernet port 6. Console(config)# interface ethernet 6 console(config-if)# switchport trunk allowed vlan add 1-2,5-6 Page 298