D-Link DES-3010FA-TAA CLI Guide - Page 300
switchport trunk native vlan
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
D-Link DES-3010FA/GA CLI Reference Guide switchport trunk native vlan The switchport trunk native vlan Interface Configuration mode command defines the native VLAN when the interface is in trunk mode. To return to the default configuration, use the no form of this command. Syntax switchport trunk native vlan vlan-id no switchport trunk native vlan Parameters • vlan-id- Specifies the ID of the native VLAN. Default Configuration VID=1. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines The command adds the port as a member in the VLAN. If the port is already a member in the VLAN (not as a native), it should be first removed from the VLAN. Example The following example configures VLAN number 123 as the native VLAN when Ethernet port 6 is in trunk mode. Console(config)# interface ethernet 6 Console(config-if)# switchport trunk native vlan 123 Page 299