D-Link DES-3010FA-TAA CLI Guide - Page 35
bridge multicast forbidden forward-all, Address Table Commands, Syntax, Parameters
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Address Table Commands bridge multicast forbidden forward-all The bridge multicast forbidden forward-all Interface Configuration (VLAN) mode command forbids a port to be a forward-all-multicast port. To restore the default configuration, use the no form of this command. Syntax bridge multicast forbidden forward-all {add | remove} {ethernet interface-list | port-channel port-channelnumber-list} no bridge multicast forbidden forward-all Parameters • add - Forbids forwarding all multicast packets. • remove - Does not forbid forwarding all multicast packets. • interface-list - Separates nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to designate a range of ports. • port-channel-number-list - Separates nonconsecutive port-channels with a comma and no spaces; a hyphen is used to designate a range of port-channels. Default Configuration This setting is disabled. Command Mode Interface Configuration (VLAN) mode User Guidelines IGMP snooping dynamically discovers multicast router ports. When a multicast router port is discovered, all the multicast packets are forwarded to it unconditionally. This command prevents a port from becoming a multicast router port. Example In this example, forwarding all multicast packets to port 1 with VLAN 2 is forbidden. Console(config)# interface vlan 2 Console(config-if)# bridge multicast forbidden forward-all add ethernet 1 Page 34