D-Link DES-3010FA-TAA CLI Guide - Page 59
sntp client enable (Interface), sntp client enable, sntp broadcast client enable
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Clock sntp client enable (Interface) The sntp client enable Interface Configuration (Ethernet, port-channel, VLAN) mode command enables the Simple Network Time Protocol (SNTP) client on an interface. This applies to both receive broadcast and anycast updates. To disable the SNTP client, use the no form of this command. Syntax sntp client enable no sntp client enable Default Configuration The SNTP client is disabled on an interface. Command Mode Interface configuration (Ethernet, port-channel, VLAN) mode User Guidelines Use the sntp broadcast client enable Global Configuration mode command to enable broadcast clients globally. Use the sntp anycast client enable Global Configuration mode command to enable anycast clients globally. Examples The following example enables the SNTP client on Ethernet port 3. Console(config)# interface ethernet 3 Console(config-if)# sntp client enable Page 58