D-Link DES-5220TF Product Manual - Page 12

Fast Ethernet Switching System User's Guide Full Size Modules Table 2: DES-5200 Full Size Modules Module Name 12 TX Module 8 FX Module CPU Module Back Plane* Part Number 0DES5200T.A2 0DES5200F.A2 0DES5200I.A2 1ES5200B..A1 (PCBA) Description 12-Port 10/100-TX module 8-Port 100BASE-FX module CPU Module Back Plane * Note: Back Plane refers to the internal back plane of all models of the DES5200 series. It is not visible or accessible without opening the case. All modifications and repairs to the back plane must be done by D-Link Systems, Inc. or authorized repair facilities. Do not open the case. Opening the case can cause injury and/or damage. If there is a problem with the modules or the back plane, contact D-Link System, Inc. Technical Support for assistance. Optional Modules The optional modules are half size modules. The half size modules work in slots 3 and 4 of the chassis. The following optional modules are available: • The DES-5005T is a 2-Port TX module. • The DES-5005 is a 2-Port FX module. • The DES-5008 is a 1-Port gigabit module. Table 3: DES-5200 Optional Modules Module DES-5005T DES-5005 DES-5008 Part Number DES5005T..A1 DDES5005..A2 DDES5008..A2 Description 2-Port 10/100-TX module 2-Port 100BASE-FX module 1-Port 1000BASE-SX gigabit module Power Plug The three pronged power plug is located at the front of the DES-5200. The switch will work with AC in the range 100-240 VAC, 50-60 Hz. The power requirements are indicated on the rear panel of the DES-5200. Introduction 5