D-Link DES-818 User Guide - Page 23

Installation

Get D-Link DES-818 - Switch PDF manuals and user guides
UPC - 790069211775
View all D-Link DES-818 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

10/100 Fast Ethernet Switch User's Guide 2 3 INSTALLATION This chapter describes the installation procedure for the 10/100 Fast Ethernet Switch. The chapter includes information on installation, connecting power, connecting network cables, setting the port duplex mode, and some network configuration examples. Installation Site When installing the switch, choose a sturdy, level surface in a ventilated area that is dust free and away from heat vents, warm air exhaust from other devices and direct sunlight. Avoid proximity to large electric motors or other electromagnetic equipment. Observe the following guidelines when choosing a location for the 10/100 Fast Ethernet Switch: • The surface must support at least 3.0 kg (6.5 lbs). • Air temperature should range from 32° to 122° F (0° to 50° C). • Humidity should be less than 90%, non-condensing. • Site should not exceed the electromagnetic field (RFC) standards for IEC 801-3, Level 2 (3V/M) field strength. • The power outlet should be within 6 feet of the device. Installation 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
10/100 Fast Ethernet Switch User’s Guide
Installation
13
2
3
I
NSTALLATION
This chapter describes the installation procedure for the 10/100 Fast Ethernet
Switch. The chapter includes information on installation, connecting power,
connecting network cables, setting the port duplex mode, and some network
configuration examples.
Installation Site
When installing the switch, choose a sturdy, level surface in a ventilated area
that is dust free and away from heat vents, warm air exhaust from other
devices and direct sunlight. Avoid proximity to large electric motors or other
electromagnetic equipment.
Observe the following guidelines when choosing a location for the 10/100
Fast Ethernet Switch:
•
The surface must support at least 3.0 kg (6.5 lbs).
•
Air temperature should range from 32
°
to 122
°
F (0
°
to 50
°
C).
•
Humidity should be less than 90%, non-condensing.
•
Site should not exceed the electromagnetic field (RFC) standards for IEC
801-3, Level 2 (3V/M) field strength.
•
The power outlet should be within 6 feet of the device.