D-Link DES-818 User Guide - Page 28
Network Configuration Examples
UPC - 790069211775
View all D-Link DES-818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
switch up. To set for half-duplex, set the duplex switch down. To set either or both ports 1 and 2 to auto duplex mode detect, set the corresponding switch down. Figure 6 Setting the Duplex Mode Note: Full-duplex mode can only be used for connections to other switches, network servers, or network stations. Connections to hubs must use half-duplex mode only. Network Configuration Examples This section provides sample configurations showing ways you might use the 10/100 Fast Ethernet Switch. 18 Installation
18
Installation
switch
up
. To set for half-duplex, set the duplex switch
down
.
To set either
or both ports 1 and 2 to auto duplex mode detect, set the corresponding
switch
down
.
Figure 6
Setting the Duplex Mode
Note:
Full-duplex mode can only be used for
connections
to
other
switches,
network
servers, or network stations.
Connections to hubs must use half-duplex
mode only.
Network Configuration Examples
This section provides sample configurations showing ways you might use the
10/100 Fast Ethernet Switch.