D-Link DFE-2624 User Guide - Page 12
Port Configuration - d link
UPC - 790069212703
View all D-Link DFE-2624 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Dual-Speed Stackable Hub Web-based Management User's Guide ♦ Isolated/ Reconnected Group This is an option to isolate or reconnect the Hub in the hub stack. Port Configuration Clicking Fault→Group/Port Control→[Port ID] will show the current configuration information of the port. The information is described as follows: ♦ Port Type The type is UTP, BNC, or AUI. ♦ Link Status Indicates link status: link up or link down. ♦ Auto Partition Status Indicates whether the port has been auto-partitioned or not. ♦ Speed Indicates the port speed: 100Mbps or 10Mbps. ♦ Polarity Status Indicates the polarity status: normal or reversed. 10
Dual-Speed Stackable Hub Web-based Management User’s Guide
10
♦
Isolated/ Reconnected Group
This is an option to isolate or reconnect the Hub
in the hub stack.
Port Configuration
Clicking Fault
→
Group/Port Control
→
[Port ID]
will show the current configuration
information of the port.
The information is described as follows:
♦
Port Type
The type is UTP, BNC, or AUI.
♦
Link Status
Indicates link status:
link up
or
link down
.
♦
Auto Partition Status
Indicates whether the port has been auto-partitioned or
not.
♦
Speed
Indicates the port speed:
100Mbps
or
10Mbps
.
♦
Polarity Status
Indicates the polarity status:
normal
or
reversed
.