D-Link DFE-2624 User Guide - Page 7
Software Download
UPC - 790069212703
View all D-Link DFE-2624 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
♦ Community This is the SNMP community name to authenticate the receiving of traps. ♦ Delete This will remove a trap receiver from the trap receiving table. Software Download The Software Download screen allows you to cause an immediate update of the hub's parameters and/ or firmware. The fields are described as follows: ♦ Software Update Mode Set to either network or out-of-band. Determines whether the configuration file should be obtained through the Ethernet network or through the console port. ♦ Software Update Control Determines whether or not the Hub should download its configuration file the next time the Hub is booted. ♦ Boot File The path and configuration file name on the TFTP server. If you are using bootp-tftp mode, or if Get IP From BOOTP Server is enabled, the pathname will be obtained from the BOOTP server. 5