D-Link DFL-700 Product Manual - Page 19
WAN Interface Settings – Using L2TP, Username, Password, L2TP Server IP, Static IP, IP Address
![]() |
UPC - 790069264535
View all D-Link DFL-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
WAN Interface Settings - Using L2TP L2TP over Ethernet connections are used in some DSL and cable modem networks. You need to enter your account details, and possibly also IP configuration parameters of the actual physical interface that the L2TP tunnel runs over. Your ISP should supply this information. • Username - The login or username supplied to you by your ISP. • Password - The password supplied to you by your ISP. • L2TP Server IP - The IP of the L2TP server that the DFL-700 will connect to. Before L2TP can be used to connect to your ISP, the physical (WAN) interface parameters must be input. You can use either DHCP or Static IP, depending on the type of ISP used. Your ISP should supply this information. If using static IP, this information needs to be filled in. • IP Address - The IP address of the WAN interface. This IP is used to connect to the L2TP server. • Subnet Mask - Size of the external network. • Gateway IP - Specifies the IP address of the default gateway used to access the Internet. Contact your ISP if you are unsure of the necessity of this information.
![](/manual_guide/products/dlink-dfl700-product-manual-c74b9b2/19.png)