D-Link DFL-800 CLI Guide - Page 108
MPPERC456, MPPERC4128, IPPool, NBNS1, NBNS2, AllowedRoutes, ProxyARPAllInterfaces, - configuration pppoe
![]() |
UPC - 790069282133
View all D-Link DFL-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
3.24.8. PPPoETunnel Chapter 3. Configuration Reference MPPERC456 MPPERC4128 IPPool DNS1 DNS2 NBNS1 NBNS2 AllowedRoutes ProxyARPAllInterfaces ProxyARPInterfaces Comments Use an RC4 56 bit MPPE session key with MS-CHAP or MSCHAP v2 authentication protocol. (Default: Yes) Use an RC4 128 bit MPPE session key with MS-CHAP or MSCHAP v2 authentication protocol. (Default: Yes) A range, group or network that the PPTP/L2TP server will use as IP address pool to give out IP addresses to the clients from. IP of the primary DNS server. (Optional) IP of the secondary DNS server. (Optional) IP of the primary Windows Internet Name Service (WINS) server that is used in Microsoft environments which uses the NetBIOS Name Servers (NBNS) to assign IP addresses to NetBIOS names. (Optional) IP of the primary Windows Internet Name Service (WINS) server that is used in Microsoft environments which uses the NetBIOS Name Servers (NBNS) to assign IP addresses to NetBIOS names. (Optional) Restricts networks for which routes may automatically be added. (Default: all-nets) Always select all interfaces, including new ones, for publishing routes via Proxy ARP. (Default: No) Specifies the interfaces on which the security gateway should publish routes via Proxy ARP. (Optional) Text describing the current object. (Optional) 3.24.8. PPPoETunnel Description A PPPoE interface is a PPP (point-to-point protocol) tunnel over an existing physical Ethernet interface. Its IP address is dynamically assigned. Properties Name EthernetInterface IP Network DNS1 DNS2 Username Password Specifies a symbolic name for the interface. (Identifier) The physical Ethernet interface that connects to the PPPoE server network. The host name to store the assigned IP address in. (Optional) The network from which traffic should be routed into the tunnel. IP of the primary DNS server. (Optional) IP of the secondary DNS server. (Optional) Specifies the username to use for this PPPoE tunnel. The password to use for this PPPoE tunnel. 108
![](/manual_guide/products/dlink-dfl800-cli-guide-017a577/108.png)