D-Link DFL-800 CLI Guide - Page 88
DHCPServerPoolStaticHost
UPC - 790069282133
View all D-Link DFL-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
3.14. DHCPServer Chapter 3. Configuration Reference 3.14. DHCPServer Description A DHCP Server determines a set of IP addresses and host configuration parameters to hand out to DHCP clients attached to a given interface. Properties Name Interface IPAddressPool Netmask DefaultGateway Domain LeaseTime DNS1 DNS2 NBNS1 NBNS2 NextServer LogEnabled LogSeverity Comments Specifies a symbolic name for the DHCP Server rule. (Identifier) The source interface to listen for DHCP requests on. This can be a single interface or a group of interfaces. A range, group or network that the DHCP Server will use as IP address pool to give out DHCP leases from. Netmask sent to the DHCP Client. Specifies what IP should be sent to the client for use as default gateway. If unspecified or if 0.0.0.0 is specified, the IP given to the client will be sent as gateway. (Optional) Domain name used for DNS resolution. (Optional) The time, in seconds, that a DHCP lease should be provided to a host after this the client have to renew the lease. (Default: 86400) IP of the primary DNS server. (Optional) IP of the secondary DNS server. (Optional) IP of the primary Windows Internet Name Service (WINS) server that is used in Microsoft environments which uses the NetBIOS Name Servers (NBNS) to assign IP addresses to NetBIOS names. (Optional) IP of the primary Windows Internet Name Service (WINS) server that is used in Microsoft environments which uses the NetBIOS Name Servers (NBNS) to assign IP addresses to NetBIOS names. (Optional) IP address of next server in the boot process. (Optional) Enable logging. (Default: No) Specifies with what severity log events will be sent to the specified log receivers. (Default: Default) Text describing the current object. (Optional) 3.14.1. DHCPServerPoolStaticHost Description Static DHCP Server host entry Properties 88