D-Link DFL-800 CLI Guide - Page 123
OSPFInterface
UPC - 790069282133
View all D-Link DFL-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
3.33.1. OSPFArea Chapter 3. Configuration Reference DebugRoute AuthType AuthPassphrase AuthMD5ID AuthMD5Key LogEnabled LogSeverity Comments Enables or disabled logging of routing table manipulation events and also specifies the details of the log. (Default: Off) Specifies the authentication type for the OSPF protocol exchanges. (Default: None) Specifies the passphrase used for authentication. (Optional) Specifies the MD5 key ID used for MD5 digest authentication. A 128-bit key used to produce the MD5 digest. (Optional) Enable logging. (Default: No) Specifies with what severity log events will be sent to the specified log receivers. (Default: Default) Text describing the current object. (Optional) 3.33.1. OSPFArea Description An OSPF area is a sub-domain within the OSPF process which collects OSPF interfaces, neighbors, aggregates and virtual links. Properties Name AreaID Stub StubSummarize StubMetric FilterExternal FilterInterArea Comments Specifies a symbolic name for the area. (Identifier) Specifies the area id, if 0.0.0.0 is specified this is the backbone area. Enable to make the router automatically advertises a default route so that routers in the stub area can reach destinations outside the area. (Default: No) Become a default router for stub area (Summarize). (Default: Yes) Route metric for stub area. (Optional) Specifies the network addresses allowed to be imported into this area from external routing sources. (Optional) Specifies the network addresses allowed to be imported from other routers inside the area. (Optional) Text describing the current object. (Optional) 3.33.1.1. OSPFInterface Description Select and define the properties of an interface that should be made a member of the Router Process. Properties Interface Specifies which interface in the security gateway will be used for this OS123