D-Link DGS-1024T Product Manual - Page 9
Front-Panel Components - 24
UPC - 790069242151
View all D-Link DGS-1024T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
D-Link DGS-1024T Unmanaged Gigabit Ethernet Switch • Auto-negotiation (NWay) between 10/100/1000 Mbps, half-duplex or full duplex and flow control for 10/100/1000BASE-T ports. • Gigabit ports support connection bypass mode Ports • Twenty-four high-performance NWay Ethernet ports, all of which operate at 10/100/1000 Mbps for connections to end stations, servers and hubs. All ports can auto-negotiate between 10Mbps, 100Mbps and 1000Mbps at full or half duplex. • Two Gigabit Ethernet Combo ports for making 1000BASE-T and Mini GBIC connections Front-Panel Components The front panel of the Switch consists of LED indicators, 24 (10/100/1000 Mbps) Ethernet ports and 2 Mini GBIC Combo ports. Figure 1 - 1. Front Panel View of the switch as shipped Comprehensive LED indicators display the status of the switch and the network. Two Mini GBIC Combo ports for connections to server or network backbone LED Indicators The LED indicators of the Switch include Power, 1000M and Link/Act. The following shows the LED indicators for the Switch along with an explanation of each indicator. Figure 1-2. LED Indicators Power 1000M Link/Act This indicator on the front panel should be lit during the Power-On Self Test (POST). It will light green approximately 2 seconds after the switch is powered on to indicate the ready state of the device. This indicator on the front panel will light solid green for a port transferring at 1000Mbps. If this LED is dark, the port will be transferring at 10/100Mbps Each on-board Gigabit Ethernet port has a corresponding indicator. This will light steady green for a valid link and blink whenever there is reception or transmission (i.e. Activity--Act) of data occurring at a port. 9