D-Link DGS-1210-16 Product Manual - Page 65
Line Interface, Syntax, Parameter, Description, Reboot, Reset, Show ipif, Example, Show switch
UPC - 790069332210
View all D-Link DGS-1210-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
6 Command Line Interface D-Link Web Smart Switch User Manual NOTE: Save your configuration changes before logging out. Ping This command checks if another computer is on the network and listens for connections. You can ping the switch from any IP workstation the switch is connected to through the managed VLAN (VLAN 1 by default), as long as there is a physical path between the switch and the workstation. The terminal interface sends five pings to the target station. Syntax ping Parameter Parameter Description The IP address of the target station. Reboot This command reboots the system. All network connections are terminated and the boot code executes. Syntax reboot Reset All configurations will be reset to the default settings. Syntax reset config Show ipif The command displays the current IP address of the switch. Syntax show ipif Example Figure 98 - The show ipif Command Show switch The command displays the status of the switch. Syntax show switch 61