D-Link DGS-1520 Quick Install Guide - Page 12
DGS-1520-28, MGMT Port, Redundant Power Supply
View all D-Link DGS-1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Figure 2-9 DGS-1520-28 Rear Panel This following table lists the front panel components unique to the DGS-1520-28: Port Description MGMT Port (PoH IN Port) The RJ45 Management (MGMT) port is an IP-based, Out-Of-Band (OOB) port for Telnet, Web, or SNMP management that operates at 10/100/1000 Mbps wirespeed. This port can be used to configure the Switch without being connected to the network. The MGMT port can also be used to supply the Switch with 90W DC power using Power over HDBaseT. This can be used as the main power source or as the secondary power source to the Switch. Figure 2-10 DGS-1520-28MP Rear Panel This following table lists the front panel components unique to the DGS-1520-28MP: Port Description Redundant Power Supply The RPS port can be used to connect an optional external load-sharing RPS to the Switch. When the internal power fails, the external RPS will immediately supply power to the Switch automatically. Figure 2-11 DGS-1520-52 Rear Panel This following table lists the front panel components unique to the DGS-1520-52: Port Description MGMT Port (PoH IN Port) The RJ45 Management (MGMT) port is an IP-based, Out-Of-Band (OOB) port for Telnet, Web, or SNMP management that operates at 10/100/1000 Mbps wirespeed. This port can be used to configure the Switch without being connected to the network. The MGMT port can also be used to supply the Switch with 90W DC power using Power over HDBaseT. This can be used as the main power source or as the secondary power source to the Switch. Figure 2-12 DGS-1520-52MP Rear Panel 7