D-Link DGS-3100-48 Product Manual - Page 136
Defining Bandwidth Settings
UPC - 790069304866
View all D-Link DGS-3100-48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
DGS-3100 Series Gigabit Stackable Managed Switch User Manual Defining Bandwidth Settings The Bandwidth Control Page allows network managers to define the bandwidth settings for a specified interface. 1. Click QoS > Bandwidth Control. The Bandwidth Control Page opens: Figure 4-2. Bandwidth Control Page The Bandwidth Control Page contains the following fields: Field Unit Description Defines the stacking member for which the bandwidth parameters are displayed From Port Defines from which port number bandwidth settings are displayed. To Port Defines to which port number bandwidth settings are displayed. RX No Limit Defines if ingress bandwidth limitation is assigned to the port. The field value options are: Enabled - Ensures no bandwidth limitations on the port. (This is the default value). Disabled -Enables ingress bandwidth limitations on the port. When disabled, user can enter a limit value in the RX Rate field. RX Rate (3500-1000000) kbps Specifies the maximum ingress rate on the port. The possible field range is 3500 - 1000000 Kbps TX No Limit Specifies whether egress bandwidth limitation applies to the port. The possible field values are: Enabled - Specifies no egress bandwidth limitations on the port. (This is the default value). Disabled -Enables egress bandwidth limitations on the port. When disabled, the user can enter a limit value in the TX Rate field. TX Rate (64-1000000) Kbps Specifies the maximum egress rate on the port. The possible field range is 64 - 1000000 Kbps. 120