D-Link DGS-3620-52P Web UI Reference Guide - Page 247

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide Figure 5-11124 BGP Peer Group Settings - View Detail window Click the BGP Neighbor > BGP Neighbor Group Settings, as shown below: Figure 5-11225 BGP Neighbor Group Settings window The fields that can be configured are described below: Parameter Description Peer Group Name Enter the name of the BGP peer group. IP Address Enter the IP address of the BGP speaking neighbor. Remote AS Number Click the radio button and enter the number of autonomous systems to which the peer (1-65535) group belongs to. The range is from 1 to 65535. Peer Group Name Click the radio button and use the drop-down menu to select a name of the BGP peer group. Click the Add button to add a new entry based on the information entered in each individual section. BGP Neighbor Description Settings This window is used to configure BGP neighbor description settings. To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Description Settings, as shown below: 237