D-Link DGS-3620-52P Web UI Reference Guide - Page 399
DHCP Relay Option 60 Server Settings
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 399 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide Figure 9-4 DHCP Relay Interface Settings window The fields that can be configured are described below: Parameter Description Interface Name The IP interface on the Switch that will be connected directly to the client. Server IP Address Enter the IP address of the DHCP server. Up to four server IPs can be configured per IP Interface. Click the Apply button to accept the changes made. DHCP Relay Option 60 Server Settings On this page the user can configure the DHCP relay option 60 server parameters. To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Option 60 Server Settings as shown below: Figure 9-5 DHCP Relay Option 60 Server Settings window The fields that can be configured are described below: Parameter Description Server IP Address Enter the DHCP Relay Option 60 Server Relay IP Address. Mode Use the drop-down menu to select the DHCP Relay Option 60 Server mode. Click the Add button to add a new entry based on the information entered. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Click the Delete All button to remove all the entries listed. NOTE: When there is no matching server found for the packet based on option 60, the relay servers will be determined by the default relay server setting. DHCP Relay Option 60 Settings This option decides whether the DHCP Relay will process the DHCP option 60 or not To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Option 60 Settings as shown below: 389