D-Link DGS-3620-52T-SE-LIC Product Manual - Page 108
Multicast Static FDB Settings
View all D-Link DGS-3620-52T-SE-LIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide To view the following window, click L2 Features > FDB > Static FDB Settings > Unicast Static FDB Settings, as show below: Figure 4-44 Unicast Static FDB Settings window The fields that can be configured are described below: Parameter Description VLAN Name Click the radio button and enter the VLAN name of the VLAN on which the associated unicast MAC address resides. VLAN List Click the radio button and enter a list of VLAN on which the associated unicast MAC address resides. MAC Address The MAC address to which packets will be statically forwarded. This must be a unicast MAC address. Port/Drop Allows the selection of the port number on which the MAC address entered above resides This option could also drop the MAC address from the unicast static FDB. When selecting Port, enter the port number in the field. The format can be "unit ID:port number" (e.g. 1:5) or "port number" (e.g. 5). When only entering port number, the default unit ID is 1. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Multicast Static FDB Settings Users can set up static multicast forwarding on the Switch. To view the following window, click L2 Features > FDB > Static FDB Settings > Multicast Static FDB Settings, as show below: Figure 4-45 Multicast Static FDB Settings window The fields that can be configured are described below: Parameter Description VID The VLAN ID of the VLAN the corresponding MAC address belongs to. Multicast MAC Address The static destination MAC address of the multicast packets. This must be a 98