D-Link DGS-3620-52T-SE-LIC Product Manual - Page 303
Profile ID 1-5, Select ACL Type, 1Q VLAN, IPv4 DSCP, Source IP Mask, Destination IP Mask, Protocol
View all D-Link DGS-3620-52T-SE-LIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Figure 7-29 Add CPU ACL Profile (IPv4 ACL) The fields that can be configured are described below: Parameter Description Profile ID (1-5) Select ACL Type 802.1Q VLAN IPv4 DSCP Source IP Mask Destination IP Mask Protocol Enter a unique identifier number for this profile set. This value can be set from 1 to 5. Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet content mask. This will change the menu according to the requirements for the type of profile. Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header. Select IPv4 to instruct the Switch to examine the IP address in each frame's header. Select IPv6 to instruct the Switch to examine the IP address in each frame's header. Select Packet Content Mask to specify a mask to hide the content of the packet header. Selecting this option instructs the Switch to examine the VLAN part of each packet header and use this as the, or part of the criterion for forwarding. Selecting this option instructs the Switch to examine the DiffServ Code part of each packet header and use this as the, or part of the criterion for forwarding. Enter an IP address mask for the source IP address, e.g. 255.255.255.255. Enter an IP address mask for the destination IP address, e.g. 255.255.255.255. Selecting this option instructs the Switch to examine the protocol type value in each frame's header. You must then specify what protocol(s) to include according to the following guidelines: Select ICMP to instruct the Switch to examine the Internet Control Message Protocol (ICMP) field in each frame's header. 293