D-Link DGS-3620-52T-SE-LIC Product Manual - Page 113
IGMP Proxy Downstream Settings, IGMP Proxy Group
View all D-Link DGS-3620-52T-SE-LIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide VID Click the radio button and enter the VLAN ID for the interface. Source IP Address Enter the source IP address of the upstream protocol packet. If it is not specified, zero IP address will be used as the protocol source IP address. Unsolicited Report Interval (0-25) The Unsolicited report interval. It is the time between repetitions of the host's initial report of membership in a group. Default is 10 seconds. If set to 0, it means to send only one report packet. Unit Select the unit you wish to configure. Static Router Port Select the port that will be included in this configuration. Click the Apply button to accept the changes made for each individual section. Click the Select All button to select all the ports for configuration. Click the Clear All button to unselect all the ports for configuration. IGMP Proxy Downstream Settings This window is used to configure the IGMP proxy downstream interface in this page. The IGMP proxy downstream interface must be an IGMP snooping enabled VLAN. To view the following window, click L2 Features > L2 Multicast Control > IGMP Proxy > IGMP Proxy Downstream Settings, as show below: Figure 4-51 IGMP Proxy Downstream Settings window The fields that can be configured are described below: Parameter Description VLAN Name Enter the VLAN Name which belongs to the IGMP proxy downstream interface. VID List Enter a list of VLANs which belong to the IGMP proxy downstream interface. Downstream Action Use the drop-down menu to add or delete a downstream interface. Click the Apply button to accept the changes made. IGMP Proxy Group This window displays the IGMP Proxy Group settings. To view the following window, click L2 Features > L2 Multicast Control > IGMP Proxy > IGMP Proxy Group, as show below: 103