D-Link DGS-3630-52PC User Manual 1 - Page 237
LLDP-MED Port Settings, L2 Features > LLDP > LLDP-MED Port Settings
View all D-Link DGS-3630-52PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Link Aggregation Maximum Frame Size Energy-Efficient Ethernet Power Via MDI Description node, and (2) the current duplex and bit-rate settings of the sending IEEE 802.3 LAN node. Select this option to enable or disable the Link Aggregation TLV to send. The Link Aggregation TLV indicates contains the following information. Whether the link is capable of being aggregated, whether the link is currently in an aggregation, and the aggregated port channel ID of the port. If the port is not aggregated, then the ID is 0. Select this option to enable or disable the Maximum Frame Size TLV to send. The Maximum Frame Size TLV indicates the maximum frame size capability of the implemented MAC and PHY. Select this option to enable or disable the Energy Efficient Ethernet TLV to send. The Energy Efficient Ethernet TLV indicates the reduce energy consumption capability of a link when no packets are being sent. Select this option to enable or disable the power via MDI TLV to send. IEEE 802.3 PMD implementations allow power to be supplied over the link for connected non-powered systems. The Power Via MDI TLV allows network management to advertise and discover the MDI power support capabilities of the sending IEEE 802.3 LAN station. Click the Apply button to accept the changes made. LLDP-MED Port Settings The LLDP-MED Port Settings page is used to enable or disable outbound LLDP advertisements for LLDP-MED TLVs. To view the following window, click L2 Features > LLDP > LLDP-MED Port Settings, as shown below: Figure 5-104 LLDP-MED Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Notification Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable transmitting the LLDP-MED notification TLV. 225