D-Link DGS-3630-52PC User Manual 1 - Page 462
iSCSI Settings, QoS > iSCSI > iSCSI Settings, iSCSI State, iSCSI CoS, Default, Remark
View all D-Link DGS-3630-52PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 462 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide • Monitoring activity in the iSCSI sessions to allow for aging out session entries if the session termination packets are not received. iSCSI Settings This window is used to display and configure the Internet Small Computer Systems Interface (iSCSI) settings. To view the following window, click QoS > iSCSI > iSCSI Settings, as shown below: Figure 7-30 iSCSI Settings Window The fields that can be configured are described below: Parameter iSCSI State iSCSI CoS Session Aging Time Description Select to globally enable or disable the iSCSI awareness feature here. Select the iSCSI CoS that will be configured here. Options to choose from are: • VPT - Specifies to use VLAN Priority Tag (VPT) to assign iSCSI session packets. Enter the VPT value in the space provided. • DSCP - Specifies to use DSCP to assign iSCSI session packets. Enter the DSCP value in the space provided. • Default - Specifies to use the default settings. By default, the VPT is used with the value of 7. Select the Remark option to mark the iSCSI frames with the configured VPT or DSCP when egressing the Switch. Enter the session aging time value here. The range is from 1 to 43200 minutes. This is used to configure the aging time for iSCSI sessions. When configuring the aging time to be longer than the current setting, the current sessions will be timed out and use the new aging time. When configuring the aging time to be shorter than the current setting, sessions that are longer than the new aging time will be deleted, and sessions that are shorter than or equal to the new aging time will be continue to be monitored with the new setting. Select the Default option to use the default value which is 5 minutes. Click the Apply button to accept the changes made. The fields that can be configured in iSCSI Targets and TCP Ports are described below: Parameter iSCSI Target Port Description Enter the iSCSI target port number here. The range is from 1 to 65535. 450