D-Link DI-808HV Product Manual - Page 98
Resetting the DI-808HV to the Factory Default Settings - d link reset
UPC - 790069262272
View all D-Link DI-808HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Resetting the DI-808HV to the Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-808HV to the factory default settings. To hard-reset the D-Link DI-808HV to the Factory Default Settings, please do the following: Locate the Reset button on the back of the DI-808HV. Use a paper clip to press the Reset button and power on. Hold for about 5 seconds (do not hold for too long) and then release. (Or, release when M1 and M2 flash at the same time.) After you have completed the above steps, the DI-808HV will be reset to the factory default settings. 98
98
After you have tried other methods for troubleshooting your network, you
may choose to
Reset
the DI-808HV to the factory default settings.
To hard-reset the D-Link DI-808HV to the Factory Default Settings, please do
the following:
Resetting the DI-808HV to the
Factory Default Settings
±
±
Use a paper clip to press the
Reset
button and
power on.
Locate the
Reset
button on the back of the DI-808HV.
±
After you have completed the above steps, the DI-808HV
will be reset to the factory default settings.
±
Hold for about 5 seconds (do not hold for too long)
and then release. (Or, release when M1 and M2
flash at the same time.)