D-Link DIS-300G-14PSW CLI Manual - Page 19
Introduction, Connect Interface, Screen Description
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Operator Interface 2 Operator Interface 2.1 Introduction Access to the Switch is protected by a logon security system. You can log on to the switch with the user name and password. After three failed logon attempts, the system refuses further attempts. After you log on, the system monitors the interface for periods of inactivity. If the interface is inactive for too long, you are automatically logged off. The CLI initial user name/password is admin/admin. You should change the password as soon as possible, because the initial password is known to anyone who reads this manual. You can also change the user name or add additional user names. Use the "account add" command to enter a new user identification, password and authorization level. 2.2 Connect Interface Interface Console Telnet SSH Parameter Baud rate: 115200bps, Data bit: 8, Parity: None, Stop bit: 1 Port 23 Port 22 (In Windows, you can run terminal emulator such as PuTTY) 2.3 Screen Description 1. Connecting to DIS-300G Ethernet port(RJ45 Ethernet port) 2. Key-in the command under Telnet: telnet 10.90.90.90 3. Login with default account and password. Username: admin Password: admin 7