Home » D-Link Manuals » Hubs & Switches » D-Link DIS-300G-14PSW » Manual Viewer

D-Link DIS-300G-14PSW CLI Manual - Page 53

reload, 3.64 rmon, 3.65 rmon alarm

View all D-Link DIS-300G-14PSW manuals

Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

3.3.63 reload Description Syntax Parameter 3.3.64 rmon Description Syntax Parameter 3.3.65 rmon alarm Description Syntax Parameter System or configuration reset reload { cold | default } Name cold defaults Description Reload cold Reload defaults without rebooting RMON rmon {alarm | event} Name alarm event Description Configure an RMON alarm Configure an RMON event RMON Alarm rmon alarm { absolute | delta } rising-threshold [ ] falling-threshold [ ] { [ rising | falling | both ] } Name id ifInDiscards fInErrors ifInNUcastPkts ifInOctets ifInUcastPkts ifInUnknownProtos ifOutDiscards ifOutErrors ifOutNUcastPkts ifOutOctets ifOutUcastPkts interval absolute delta rising_threshold rising_event_id Description Alarm entry ID The number of inbound packets that are discarded even the packets are normal The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol The number of broad-cast and multi-cast packets delivered to a higher-layer protocol The total number of octets received on the interface, including framing characters The number of uni-cast packets delivered to a higher-layer protocol The number of the inbound packets that were discarded because of the unknown or un-support protocol The number of outbound packets that are discarded event the packets is normal The The number of outbound packets that could not be transmitted because of errors The number of broad-cast and multi-cast packets that request to transmit The number of octets transmitted out of the interface, including framing characters The number of uni-cast packets that request to transmi Sample interval Test each sample directly Test delta between samples rising threshold value Event to fire on rising threshold 41

Section	Page
1 Scope	15
1.1 Scope	15
1.2 Audience	15
1.3 Pre-required Knowledge	15
1.4 Access to Hardware Interface	15
1.5 Related Documents	15
2 Operator Interface	19
2.1 Introduction	19
2.2 Connect Interface	19
2.3 Screen Description	19
2.4 Execution Modes	20
2.5 Getting help	20
2.6 Terminal Key Function	21
2.7 Notation Conventions	21
3 Commands Descriptions	24
3.1 Initialize Mode Commands	24
3.1.1 exit	24
3.1.2 configure terminal	24
3.1.3 enable	24
3.1.4 Show terminal	24
3.1.5 Show history	24
3.1.6 Show clock	24
3.1.7 Show clock detail	24
3.2 Enable Mode Commands	25
3.2.1 configure terminal	25
3.2.2 disable	25
3.2.3 show aaa	25
3.2.4 show access management	25
3.2.5 show access-list	25
3.2.6 show aggregation	26
3.2.7 show alarm	26
3.2.8 show cpu-load	26
3.2.9 show green-ethernet	26
3.2.10 show ip	26
3.2.11 show ipmc	27
3.2.12 show ipv6	27
3.2.13 show lacp	27
3.2.14 show line	27
3.2.15 show logging	27
3.2.16 show loop-protec	28
3.2.17 show ntp status	28
3.2.18 show users	28
3.2.19 show running-cfg	28
3.2.20 show running-config interface Gigabit	28
3.2.21 show running-config interface vlan	28
3.2.22 show running-config all-defautls	28
3.2.23 show running-config feature	28
3.2.24 show running-config line	29
3.2.25 show running-config vlan	29
3.2.26 show version	29
3.2.27 show clock	29
3.2.28 show ddmi	29
3.2.29 show version	29
3.2.30 show system inventory	30
3.2.31 show mac address table aging-time	30
3.2.32 show mac address table	30
3.2.33 show mac address table conf	30
3.2.34 show mac address table count	30
3.2.35 show mac address table learning	30
3.2.36 show mac address table static	30
3.2.37 show mac address table interface	31
3.2.38 show mac address vlan <vlanid>	31
3.2.39 show mvr	31
3.2.40 show fdb static table	31
3.2.41 show fdbstatic interface gigabit <portNo>	31
3.2.42 show fdbstatic vlan <vlanid>	32
3.2.43 show interface port < port_type_list >	32
3.2.44 show interface port <portNo> statistics	33
3.2.45 show platform phy	33
3.2.46 show poe	33
3.2.47 show port-security	33
3.2.48 show profile alarm	34
3.2.49 show sflow	34
3.2.50 show snmp	34
3.2.51 show spanning-tree	35
3.2.52 show switchport forbidden	35
3.2.53 show tacacs-server	35
3.2.54 show vlan	35
3.2.55 show vlan id	36
3.2.56 show vlan name	36
3.2.57 show vlan brief	36
3.2.58 show vlan ip-subnet	36
3.2.59 show vlan mac	36
3.2.60 show vlan protocol	36
3.2.61 show vlan status	37
3.2.62 show qos-queue-mapping	37
3.2.63 show interface ports <portNo> priority	37
3.2.64 show qos	37
3.2.65 show queue-shaper	37
3.2.66 show port-shaper	38
3.2.67 show pvlan [ <pvlan_list> ]	38
3.2.68 show pvlan isolation [ interface <port_type> [ <port_type_list> ] ]	38
3.2.69 show interface gigabit <portNo> port-isolation	38
3.2.70 show interface gigabit <portNo> storm-control	38
3.2.71 show interface gigabit <portNo> transceiver	38
3.2.72 show qos interface	39
3.2.73 show qos maps	39
3.2.74 show qos qce	39
3.2.75 show qos storm {unknown-uc\|unknown-mc\|broadcast}	39
3.2.76 show port-mirror	39
3.2.77 show ringv2	39
3.2.78 show rmon	40
3.2.79 show interface gigabit <portNo>	40
3.2.80 show ext-tpid	40
3.2.81 show interface vlan	40
3.2.82 show interface vlan <vlanid>	40
3.2.83 show protocol-vlan	40
3.2.84 show interface gigabit <portNo> vlan	40
3.2.85 show vlan-trans	41
3.2.86 show multicast-fdb	41
3.2.87 show dot1x	41
3.2.88 show dot1x status	41
3.2.89 show dot1x statistics	41
3.2.90 show radius-server [ statistics ]	41
3.2.91 show rfc2544 profile [ <word32> ]	41
3.2.92 show voice	42
3.2.93 show web	42
3.3 Configure Mode Commands	43
3.3.1 interface gigabit <portNo>	43
3.3.2 interface vlan <vlanid>	43
3.3.3 aaa	43
3.3.4 access	43
3.3.5 access-list	43
3.3.6 aggregation mode	43
3.3.7 alarm history clear	44
3.3.8 banner	44
3.3.9 ddmi	44
3.3.10 default access-list rate-limiter	44
3.3.11 profile sch	44
3.3.12 ntp server <1-5> ip-address <ip>	44
3.3.13 clock timezone	44
3.3.14 clock summer-time set [start-time] [end-time]	45
3.3.15 account add <username>	45
3.3.16 account delete <username>	45
3.3.17 syslog {enable\|disable}	45
3.3.18 configuration save and replace	46
3.3.19 clear ip igmp snooping statistics	46
3.3.20 clear logging	46
3.3.21 clear mac address-table	46
3.3.22 debug	46
3.3.23 delete	46
3.3.24 dir	46
3.3.25 do	47
3.3.26 duplex	47
3.3.27 editing	47
3.3.28 firmware	47
3.3.29 flowcontrol	47
3.3.30 frame-sizes	47
3.3.31 green-etherneteee	48
3.3.32 green-etherneteee optimize-for-power	48
3.3.33 green-etherneteee urgent-queues	48
3.3.34 help	48
3.3.35 iparp inspection	48
3.3.36 ip arp inspection translate	48
3.3.37 ip arp inspection entry	48
3.3.38 ip arp inspection vlan	49
3.3.39 ip dns proxy	49
3.3.40 ip http secure-redirect	49
3.3.41 ip http secure-server	49
3.3.42 ip source binding interface	49
3.3.43 ip ssh	49
3.3.44 ip name-server	49
3.3.45 ip route	50
3.3.46 ip routing	50
3.3.47 ip verify	50
3.3.48 ipmc profile	50
3.3.49 ipmc range	50
3.3.50 lacp	50
3.3.51 line	51
3.3.52 login host	51
3.3.53 login level	51
3.3.54 login on	51
3.3.55 logout	51
3.3.56 mac address-table aging-time	51
3.3.57 mac address-table static	51
3.3.58 more	52
3.3.59 no	52
3.3.60 ping	52
3.3.61 port-security	52
3.3.62 privilege	52
3.3.63 reload	53
3.3.64 rmon	53
3.3.65 rmon alarm	53
3.3.66 rmon alarm	54
3.3.67 terminal	54
3.3.68 vlan <vlanid>	54
3.3.69 vlan <vlanid> <name>	54
3.3.70 vlan disable <vlanid>	55
3.3.71 mac address-table aging-time <time>	55
3.3.72 mtu <value>	55
3.3.73 media-type	55
3.3.74 monitor destination interface	55
3.3.75 monitor source interface	55
3.3.76 monitor source cpu	56
3.3.77 speed	56
3.3.78 tacacs-server host	56
3.3.79 tacacs-server key	56
3.3.80 tacacs-server timeout	56
3.3.81 traps	57
3.3.82 upnp	57
3.3.83 upnp advertising-duration	57
3.3.84 upnp ttl	57
3.3.85 username	57
3.3.86 web	57
3.3.87 flow-control {enable\|disble}	58
3.3.88 speed	58
3.3.89 port {enable/disable}	58
3.3.90 Date/Time	59
3.4 VLAN Mode Commands	59
3.4.1 vlan	59
3.4.2 vlan ethertype s-custom-port	59
3.4.3 vlan protocol	59
3.4.4 vlan-trunking	59
3.4.5 switchport access vlan	60
3.4.6 switchport forbidden vlan	60
3.4.7 switchport hybrid acceptable-frame-type	60
3.4.8 switchport hybrid allowed vlan	60
3.4.9 switchport hybrid egress-tag	60
3.4.10 switchport hybrid ingress-filtering	61
3.4.11 switchport mode	61
3.4.12 switchport trunk allowed vlan	61
3.4.13 switchport vlan protocol group	61
3.5 Interface VLAN Mode Commands	62
3.5.1 interface	62
3.5.2 interface vlan	62
3.5.3 ip address	62
3.5.4 ip name-server	62
3.5.5 ip dhcp excluded-address	62
3.5.6 ip dhcp pool	62
3.5.7 ip dhcp server	63
3.5.8 ip dhcp relay	63
3.5.9 ip dhcp relay information option	63
3.5.10 ip dhcp retry interface vlan	63
3.5.11 ip dhcp snooping	63
3.5.12 ip helper-address	63
3.5.13 ipv6 address	63
3.5.14 ipv6mtu	63
3.6 RingV2 Group Mode Commands	64
3.6.1 ringv2 protect	64
3.6.2 guard-time	64
3.6.3 mode	64
3.6.4 node1 interface GigabitEthernet <portNo>}	64
3.6.5 node2 interface GigabitEthernet <portNo>}	64
3.6.6 role	64
3.7 Spanning Tree	65
3.7.1 spanning-tree	65
3.7.2 spanning-tree aggregation	65
3.7.3 spanning-tree auto-edge	65
3.7.5 spanning-tree bpdu-guard	65
3.7.6 spanning-tree edge	65
3.7.7 spanning-tree edge bpdu-filter	66
3.7.8 spanning-tree mode	66
3.7.9 spanning-tree mst cost	66
3.7.10 spanning-tree mst port-priority	66
3.7.11 spanning-tree mst priority	66
3.7.12 spanning-tree mst vlan	67
3.7.13 spanning-tree mst forward-time	67
3.7.14 spanning-tree mst max-age	67
3.7.15 spanning-tree mst max-hops	67
3.7.16 spanning-tree mst name	67
3.7.17 spanning-tree mst <instance>	67
3.7.18 spanning-tree recovery	68
3.7.19 spanning-tree transmit	68
3.8 sFlow Configure Command	68
3.8.1 sflow	68
3.8.2 sflow agent-ip	68
3.8.3 sflow collector-address	68
3.8.4 sflow max-datagram-size	68
3.8.5 sflow max-sampling-size	69
3.8.6 sflow collector-port	69
3.8.7 sflow sampling-rate	69
3.8.8 sflow timeout	69
3.9 SNMP Configure Command	69
3.9.1 snmp-server	69
3.9.2 snmp-server access	69
3.9.3 snmp-server community v2c	70
3.9.4 snmp-server community v3	70
3.9.5 snmp-server host	70
3.9.6 snmp-server host traps	70
3.9.7 snmp-server trap	70
3.9.8 snmp-server user	70
3.9.9 snmp-server version	71
3.9.10 snmp-server view	71
3.9.11 SNMP trap receive ipv6 host	71
3.9.12 snmp-server contact	71
3.9.13 snmp-server engine-id	71
3.9.14 snmp-server location	71
3.9.15 snmp-server security-to-group	72
3.9.16 SNMP trap receive ipv4 host	72
3.10 Qos Function Command	72
3.10.1 qos qce	72
3.10.2 qos storm	72
3.10.3 qos cos	73
3.10.4 qos dscp-classify	73
3.10.5 qos dscp-remark	73
3.10.6 qos dscp-translate	73
3.10.7 qos map cos-dscp	73
3.10.8 qos map cos-dscp	73
3.10.9 qos map dscp-egress-translation	74
3.10.10 qos map dscp-ingress-translation	74
3.10.11 qos policer	75
3.10.12 qos wrr	75
3.10.13 qos queue-shaper	75
3.10.14 qos queue-policer	75
3.10.15 qos shaper <unit>	75
3.11 IGMP Functional Commands	76
3.11.1 ip igmp host-proxy [ leave-proxy ]	76
3.11.2 ip igmp snooping	76
3.11.3 ip igmp snooping immediate-leave	76
3.11.4 ip igmp snooping last-member-query-interval	76
3.11.5 ip igmp snooping max-groups	76
3.11.6 ip igmp snooping mrouter	76
3.11.7 ip igmp snooping querier	76
3.11.8 ip igmp snooping query-interval	76
3.11.9 ip igmp snooping vlan	77
3.11.10 ip igmp ssm-range	77
3.11.11 ip igmp unknown-flooding	77
3.11.12 clear ip igmp snooping statistics	77
3.12 MVR Functional Commands	77
3.12.1 mvr	77
3.12.2 mvr immediate-leave	77
3.12.3 mvr name channel	77
3.12.4 mvr frame priority	77
3.12.5 mvr name <word16> frame tagged	78
3.12.6 mvr name <word16> igmp-address <ipv4_ucast>	78
3.12.7 mvr name <word16> last-member-query-interval <0-31744>	78
3.12.8 mvr name <word16> mode	78
3.12.9 mvr name <word16> type	78
3.12.10 mvr vlan	78
3.12.11 mvr vlan <vlan_list> channel	78
3.12.12 mvr vlan <vlan_list> frame priority	78
3.12.13 mvr vlan <vlan_list> frame tagged	79
3.12.14 mvr vlan <vlan_list> igmp-address	79
3.12.15 mvr vlan <vlan_list> mode	79
3.12.16 mvr vlan <vlan_list> type	79
3.13 MLD Functional Commands	79
3.13.1 ipv6 mld host-proxy	79
3.13.2 ipv6 mld snooping	79
3.13.3 ipv6 mld snooping compatibility	79
3.13.4 ipv6 mld snooping immediate-leave	80
3.13.5 ipv6 mld snooping last-member-query-interval	80
3.13.6 ipv6 mld snooping max-groups	80
3.13.7 ipv6 mld snooping mrouter	80
3.13.8 ipv6 mld snooping query-interval	80
3.13.9 ipv6 mld snooping query-max-response-time	80
3.13.10 ipv6 mld snooping vlan	80
3.13.11 ipv6 mld ssm-range	80
3.13.12 ipv6 mld unknown-flooding	81
3.13.13 ipv6 route	81
3.14 Authenticate Mode Commands	81
3.14.1 radius-server attribute 32	81
3.14.2 radius-server attribute 4	81
3.14.3 radius-server attribute 95	81
3.14.4 radius-server deadtime	81
3.14.5 radius-server host [ auth-port] [ acct-port ] [ timeout ] [ retransmit ] [ key]	81
3.14.6 radius -server key	82
3.14.7 radius-server retransmit	82
3.14.8 radius-server timeout	82
3.14.9 tacacs-server deadtime <1-1440>	82
3.14.10 tacacs-server host [ auth-port] [ timeout ] [ key]	82
3.14.11 tacacs-server deadtime <1-1440>	83
3.14.12 tacacs-server deadtime <1-1440>	83
3.14.13 dot1x feature	83
3.14.14 dot1x authentication timer	83
3.14.15 dot1x max-reauth-req	83
3.14.16 dot1x re-authentication	83
3.14.17 dot1x system-auth-controln	83
3.14.18 dot1x timeout	84
3.14.19 dot1x guest-vlan	84
3.14.20 dot1x initialize	84
3.14.21 dot1x port-control	84
3.14.22 dot1x radius-vlan	84
3.14.23 show radius-server [ statistics ]	84
3.14.24 enable	85
3.14.25 end	85
3.14.26 exit	85
3.14.27 hostname	85
3.15 Loop-Protection Configure commands	85
3.15.1 loop-protect	85
3.15.2 loop-protect action	85
3.15.3 loop-protect shutdown-time	85
3.15.4 loop-protect transmit-time	85
3.15.5 loop-protect tx-mode	86
3.16 LLDP Configure commands	86
3.16.1 lldp holdtime	86
3.16.2 lldp med	86
3.16.3 lldp receive	87
3.16.4 lldp reinit <1-10>	87
3.16.5 lldp timer <5-32768>	87
3.16.6 lldp tlv-select	87
3.16.7 lldp transmission-delay	87
3.16.8 lldp transmit	87
3.17 RFC2544 Testing Configure Commands	88
3.17.1 rfc2544 profile <word32>	88
3.17.2 rfc2544 rename profile	88
3.17.3 rfc2544 save <word32> <word>	88
3.17.4 rfc2544 start <word32> profile <word32> [ desc <line128> ]	88
3.17.5 rfc2544 stop <word32>	88
3.17.6 show rfc2544 profile [ <word32> ]	88
3.18 GVRP Configure Commands	89
3.18.1 gvrp	89
3.18.2 gvrpjoin request vlan	89
3.18.3 gvrpleave request vlan	89
3.18.4 gvrp max-vlans	89
3.18.5 gvrp time { [ join-time <1-20> ] [ leave-time <60-300> ] [ leave-all-time <1000-50>]	89
3.19 Voice VLAN Configure Commands	89
3.19.1 voice vlan	89
3.19.2 voice vlan aging-time	89
3.19.3 voice vlan class	90
3.19.4 voice vlan oui	90
3.19.5 voice vlan vid	90
3.20 Profile alarm Commands	90
3.20.1 profile alarm	90
3.20.2 alarm	90
3.21 PoE Commands	90
3.21.1 poe management mode	90
3.21.2 poe supply	91
3.21.3 poe 4pairs	91
3.21.4 poe mode	91
3.21.5 poe operation	91
3.21.6 poe power	92
3.21.7 poe priority	92
3.21.8 poe reset	92
3.21.9 poe schedule	92