D-Link DIS-300G-14PSW CLI Manual - Page 48
ip arp inspection translate
![]() |
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
1280 1518 2000 9600 Enable testing with 1280-byte TST PDUs Enable testing with 1518-byte TST PDUs Enable testing with 2000-byte TST PDUs Enable testing with 9600-byte TST PDUs 3.3.31 green-etherneteee Description Powering down of PHYs when there is no traffic. Syntax green-etherneteee Parameter 3.3.32 green-etherneteee optimize-for-power Description Set if EEE shall be optimized for least power consumption (else optimized for least traffic latency). Syntax green-etherneteee optimize-for-power Parameter 3.3.33 green-etherneteee urgent-queues Description Enables EEE urgent queue. An urgent queue means that latency is kept to a minimum for traffic goin to that queue. Note: EEE power savings will be reduced. Syntax green-etherneteee urgent-queues [ ] Parameter Name Description range_list EEE Interface. 3.3.34 help Description Syntax Parameter Description of the interactive help system help 3.3.35 iparp inspection Description iparp inspection Syntax iparp inspection Parameter 3.3.36 ip arp inspection translate Description IP ARP inspection entry interface configuration Syntax ip arp inspection translate [ interface ] Parameter Name Description port_type Port type in Fast, Giga or Tengigaethernet port_type_id Port ID in the format of switch-no/port-no vlan_id Select a VLAN id to configure mac_ucast Select a MAC address to configure ipv4_ucast Select an IP Address to configure 3.3.37 ip arp inspection entry Description arp inspection entry interface config Syntax ip arp inspection entry interface Parameter 36
![](/manual_guide/products/dlink-dis300g12sw-cli-manual-a95bea6/48.png)