D-Link DIS-300G-14PSW Quick Installation Guide - Page 6

Console Connection, Connect & Login to Managed Switch, 2. Factory default IP: 10.90.90.90

Get D-Link DIS-300G-14PSW PDF manuals and user guides View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Quick Installation Guide Console Connection The Console port is for local management by using a terminal emulator or a computer with terminal emulation software. ● DB9 connector connect to computer COM port ● Baud rate: 115200bps ● 8 data bits, 1 stop bit ● None Priority ● None flow control To connect the host PC to the console port, a RJ45 (male) connector-to-RS232 DB9 (female) connector cable is required. The RJ45 connector of the cable is connected to the CID port of the switch; the DB9 connector of the cable is connected to the PC COM port. The pin assignment of the console cable is shown below: NOTE: When connecting to console port, please use the designate console cable attached in the package. Connect & Login to Managed Switch 1. Connecting to the Ethernet port (RJ45 Ethernet port) of Managed Switch. 2. Factory default IP: 10.90.90.90 3. Login with default account and password. Username: admin Password: admin 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Quick Installation Guide
6
Console Connection
The Console port is for local management by using a terminal emulator or a computer with
terminal emulation software.
●
DB9 connector connect to computer COM port
●
Baud rate: 115200bps
●
8 data bits, 1 stop bit
●
None Priority
●
None flow control
To connect the host PC to the console port, a RJ45 (male) connector-to-RS232 DB9 (female)
connector cable is required. The RJ45 connector of the cable is connected to the CID port of the
switch; the DB9 connector of the cable is connected to the PC COM port. The pin assignment of
the console cable is shown below:
NOTE: When connecting to console port, please use the designate console cable attached in the package.
Connect & Login to Managed Switch
1.
Connecting to the Ethernet port (RJ45 Ethernet port) of Managed Switch.
2.
Factory default IP: 10.90.90.90
3.
Login with default account and password.
Username: admin
Password: admin