D-Link DSH-16 User Guide - Page 13

100Mbps connection. The connection is accomplished from the hub's uplink (MDI-II) port to any of DSS-16+'s 1~16 (MDI-X) ports. A. 10BASE-T Hub For a 10BASE-T hub, DSS-16+ LED indicators should light up as the following: "FDX/COL" LED indicator is OFF. "LINK/ACT" LED indicator lights amber. B. 100BASE-TX Hub When connecting to a 100BASE-TX hub, DSS-16+ LED indicator should light up as the following: "FDX/COL" LED indicator is OFF. "LINK/ACT" LED indicator lights green. Hub without Uplink (MDI-II) port If a hub is not equipped with an uplink (MDI-II) port, connection can be made using either straight cable or crossover cable. A. Using straight cable When using straight cable, the connection can be made from Switch's uplink (MDI-II) port to any port of the Hub. B. Using crossover cable When using crossover cable, the connection can be made from any regular ports of DSS-16+ to any port of the Hub. Switch to Switch (other devices) DSS-16+ can be connected to another switch or other devices (routers, 15