D-Link DSN-2100-10 User's Manual for DSN-2100-10 Valid for firmware - Page 159
The message in E-1 Firmware
UPC - 790069310638
View all D-Link DSN-2100-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Appendix E Upgrading Firmware D-Link periodically updates the firmware for the xStack Storage. The latest firmware releases are available at the D-Link Support Web site. 1. Go to the D-Link Support Web site (support.dlink.com). 2. Select your product model number from the pull-down menus. 3. Select the firmware topic. 4. Download the firmware. 5. When prompted to save the firmware file, click Save and save the file to a desired location. On a piece of paper, write the location and folder where you download the firmware file. You will need to access this location later in this procedure. Temporarily turn off any internal firewall software found on your management PC. Failure to do so will cause the firmware upgrade to fail. 6. Launch the xStack Storage Web Manager. 7. On the View menu, click Firmware Upgrade. The message in Figure E-1 Firmware Upgrade Message appears. Figure E-1 Firmware Upgrade Message 8. Click OK to continue. (Or click Cancel to exit without upgrading the firmware.) If you click OK, the Open dialog box appears (see Figure E-2). xStack Storage User's Guide 159