D-Link DWL-G730AP Product Manual - Page 17
Home > DHCP - ip address
UPC - 790069270222
View all D-Link DWL-G730AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Using the Configuration Utility in AP Mode (continued) Home > DHCP DHCP Server: Select Enabled or Disabled. Disabled is the default setting. If you want to use the DWL-G730AP as a DHCP server, to automatically assign dynamic IP addresses on the network, you will select Enabled. Starting IP Address: If you have enabled the DHCP server function, enter the starting point of the IP address range for your network. Ending IP Address: Enter the ending IP address of your IP address range, if you have enabled the DHCP function of the DWL-G730AP. Lease Time: Choose the length of time during which the DHCP function of the DWL-G730AP automatically regenerates the IP addresses to the devices in your network. DHCP Client Table: Lists the devices on your network that are receiving dynamic IP addresses from the DWL-G730AP. 17