D-Link DWL-G730AP Product Manual - Page 38
Home > WAN > Dynamic IP Address, Host Name, MAC Address, Clone, Dynamic, IP Address, Primary,
UPC - 790069270222
View all D-Link DWL-G730AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Using the Configuration Utility in Router Mode (continued) Home > WAN > Dynamic IP Address Dynamic IP Address is selected here. Other options include: Static IP Address (if your ISP provides you with a static IP address), PPPoE (for most DSL users), PPTP (for Europe) and BigPond Cable (for Australia). Dynamic IP Address- Choose Dynamic IP Address to obtain an IP address automatically. Host NameMAC Address- Clone MAC Address- Primary/ Secondary DNS AddressMTU- The Host Name is optional but may be required by some ISPs. The default host name is the device name of the router and may be changed. The default MAC address is set to the WAN's physical interface MAC address on the router. It is not recommended that you change the default MAC address unless required by your ISP. The default MAC address is set to the WAN's physical interface MAC address on the router. You can use the "Clone MAC Address" button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP. Enter a DNS address if you do not wish to use the one provided by your ISP. Maximum Transmission Unit-1500 is the default setting Enter an MTU value only if required by your ISP. Otherwise, leave it at the default setting. 38