D-Link DXS-3600-EM-4QXS CLI Guide - Page 270
show ip igmp groups
View all D-Link DXS-3600-EM-4QXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Example This example shows the information of all the interfaces. DXS-3600-32S#show ip igmp interface Interface vlan1 Internet Address is 10.90.90.90/8 IGMP is disabled on interface Current IGMP router version is 2 IGMP query interval is 120 seconds IGMP querier timeout is 0 seconds IGMP max query response time is 20 seconds Robustness variable is 3 Last member query interval is 20 seconds IGMP check subscriber source network state is disabled IGMP snooping is globally disabled IGMP snooping is disabled on this interface IGMP snooping fast-leave is disabled on this interface IGMP snooping querier is disabled on this interface Total Entries: 1 DXS-3600-32S# Display Parameters Description Internet address is Internet address of the interface and subnet mask being applied to the interface, as specified with the ip address command. IGMP is disabled on interface Indicates whether IGMP is active on the interface. The IGMP state will be automatically enabled when any multicast routing protocol (PIM or DVMRP) turns active, and be disabled if no any multicast routing protocol is active on the interface. Current IGMP router version The IGMP running version on the interface, as specified with the ip igmp version is command. IGMP query interval is Interval of the IGMP query message, as specified with the ip igmp query-interval command. IGMP querier timeout is The querier role expiring time. If this timer is running, there's other IGMP querier on this LAN. IGMP max query response Indicates the maximum allowed time before the host sending a responding report, as time is specified with the ip igmp query-max-response-time command. Robustness variable is Indicates the robustness value, as specified with the ip igmp robustness-variable command. Last member query interval Indicates the interval of the switch sending last member query, as specified with the is ip igmp last-member-query-interval command. IGMP check subscriber source network state is Indicates IGMP will check whether the source IP of the received report/leave is in the same subnet with the receiving interface, as specified with the ip igmp checksubscriber-source-network command. IGMP snooping is globally Indicates the IGMP snooping global state, as specified with the ip igmp snooping command. IGMP snooping is Indicates the IGMP snooping interface state, as specified with the ip igmp snooping vlan command. IGMP snooping fast-leave is Indicates the IGMP snooping fast-leave state, as specified with the ip igmp snooping fast-leave command. IGMP snooping querier is Indicates the IGMP snooping querier state is disabled, as specified with the ip igmp snooping querier command. 23-10 show ip igmp groups This command is used to show the groups directly connected to the device and the group information learnt from IGMP. 262