DELPHI SA10035 User Guide - Page 17

17 Wireless FM Modulator* Many late model cars do not come with built-in cassette players. These Roady users may purchase an optional wireless FM modulator that sends the audio signal through the vehicle's existing FM antenna. Roady Receiver Installation Your Roady Receiver can be installed as follows: 1. First, attach all of the components as shown in figure 4 (page 15). Insert cassette audio adaptor into the vehicle's cassette deck, the 12V power adaptor into the cigarette lighter, and the antenna on the car's roof. Turn on the car and Roady to verify that the system is working. You should always be able to access Channel 1, even if your service is not activated. Disassemble the system, and proceed with step 2. 2. Identify a hard, flat surface within your car to allow the optimum Roady viewing position for the primary user as well as access to the cassette player, power source, and antenna-cable route. In order to maximize visibility, this position should be chosen to minimize glare or direct sunlight on the display. Do not install the mount where it or Roady could block your vision, vehicle airbags, or controls. Do not install the mount on a leather surface. The adhesive used on the mount is not easily repositioned when Warning: The Roady Receiver should be placed in your vehicle where it will not interfere with the function of installed, so please use care when choosing safety features, e.g., deployment of the location and placing the mount. airbags. Failure to correctly place the Roady Receiver may result in injury to you or others if the unit becomes detached during an accident. *Optional Delphi XM wireless FM modulator available fall 2003.