DELPHI SA10117 User Guide - Page 19

Operating Near Other Wireless Devices

Page 19 highlights

section three 9 Operating Near Other Wireless Devices Your satellite radio receiver may experience audio mutes when the repeater system is operated near other wireless devices such as phones, pagers, wireless computer peripherals, wireless LANS, etc. In addition, your repeater system may interfere with the operation of these wireless devices. If it is determined other wireless devices are interfering with the transmitter, you should do one or more of the following: • Move the interfering devices away from the transmitter. • Disable other wireless devices, especially those in close proximity of the transmitter. • Increase the repeater system output power as described on page 8 to enable the repeater to overcome the power from the interfering devices. • Move the transmitter and/or the repeater antenna away from other wireless devices. • Adjust the transmitter antenna position as described on page 7.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

section three
9
Operating Near Other Wireless Devices
Your satellite radio receiver may experience audio mutes when the
repeater system is operated near other wireless devices such as
phones, pagers, wireless computer peripherals, wireless LANS,
etc. In addition, your repeater system may interfere with the
operation of these wireless devices.
If it is determined other wireless devices are interfering with the
transmitter, you should do one or more of the following:
Move the interfering devices away from the transmitter.
Disable other wireless devices, especially those in close
proximity of the transmitter.
Increase the repeater system output power as described on
page 8 to enable the repeater to overcome the power from the
interfering devices.
Move the transmitter and/or the repeater antenna away from
other wireless devices.
Adjust the transmitter antenna position as described on page 7.