DELPHI SA10226 User Guide - Page 8

Getting Started Using SKYFi3 in Your Vehicle Your SKYFi3 can be mounted in your vehicle in either portrait or landscape orientation. Changing Display Orientation Your SKYFi3 display can be changed from portrait to landscape orientation by pressing and holding the Display button. 45 F/D 0 23 SET 89 1 REC 67 Landscape orientation 1 REC 67 23 SET 89 4 5 F/D 0 Portrait Orientation Your SKYFi3 will default to the last orientation used in the car cradle. 12 Getting Started Placing the Antenna Because all vehicles are different, there are many acceptable methods of mounting the antenna and routing the cable. Make sure the antenna is placed on a clean, dry surface that is free of all debris. For best reception, place the antenna on the vehicle's metallic roof, at least 6" from any window or sun roof. option 1 option 2 For safety, do not run the antenna wire across any metal edges, through windows, or near seat tracks. Look for foam rubber trunk and door seals for insulation. If crossing a door seal, it is recommended that this be done at the bottom or low point of the vehicle. If necessary, use products such as adhesive or cable tie mounts to control the antenna wire route. If the car is a soft-top convertible, you may mount the antenna on the metal trunk lid. It should be at least 4" from the rear window. Ensure that the antenna and cable don't interfere with the opening or closing of the convertible top and trunk. Caution: Use your SKYFi3 only with the enclosed components or approved accessories. Do not modify wires or other connectors in any way; you could cause a malfunction, which could damage your SKYFi3 and will void your warranty. 13