DELPHI SA50000 User Guide - Page 19

Section 5 Troubleshooting • Make sure the adaptor is firmly seated Your SKYFi Receiver is designed and built in the cigarette lighter/auxiliary power to provide you with trouble-free perform- socket. ance without the need for service. If it does • Check the adaptor fuse by unscrewing not appear to be functioning correctly, the ribbed end of the adaptor and please follow these troubleshooting steps: examining it. If required, replace with a 1-amp fuse only. If your cigarette 1. Make sure SKYFi is properly seated in 15 its cradle or stand. lighter adaptor does not have a removable end cap, then it is 2. Make sure all connectors are properly equipped with an internal fuse that attached in the back of the cradle or resets itself after it is left unpowered stand. for a period of time. 3. If you are using the cigarette lighter/ 4. If you are using the A/C adaptor in the auxiliary power adaptor to power your home or office, make sure it is plugged SKYFi and cannot turn it on: in and that there is power at the outlet. • Make sure the cigarette lighter/auxiliary power socket is clean and free of corrosion. If you see this on the display: NO SIGNAL Cause: The XM signal is out of range. ANTENNA OFF AIR Cause: The channel selected is not currently broadcasting. You should: If you are using SKYFi at home, reposition the antenna. If you are using SKYFi in your car, the message should disappear as soon as you move out of an obstructed area such as an indoor garage. If the problem persists, make sure your antenna is mounted outside and on top of your car with a clear view of the sky. Make sure antenna is correctly attached to the SKYFi Home Stand or SKYFi Car Cradle and that antenna cable is undamaged and free from kinks. Turn the SKYFi Receiver off and back on to reset this message. Tune in to another channel.