DIRECTV RC24 User Manual - Page 9
Controlling Directv Receiver - codes
View all DIRECTV RC24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
CONTROLLING DIRECTV RECEIVER The DIRECTV Universal Remote Control is designed to give you access to features and functions found on your original remote control. To use it with your brand of DIRECTV Receiver, you will need to program the remote control by performing the following steps. Programming DIRECTV Remote 1. Locate the DIRECTV Receiver's brand and model num- ber (on the back or bottom panel) and write it in the spaces below. 2. Locate the 5-digit code for your DIRECTV Receiver (see page 10). 3. Power on the DIRECTV Receiver. 4. Move the slide switch to DIRECTV icon. 5. Press and hold in the MUTE and SELECT keys until the green light under the DIRECTV icon flashes twice and then release both keys. 6. Using the number keys enter the 5-digit code. If performed correctly the green light under the DIRECTV icon will flash twice. 7. Aim the remote at your DIRECTV Receiver and press that the power key once. The DIRECTV Receiver should turn off. If it does not turn off, repeat steps 3 and 4, trying each code for your brand until you find the correct code. 8. For future reference write down the working code for your DIRECTV Receiver in the blocks below: DIRECTV CODE: BRAND: MODEL: 9