Dacor DRR36 Use and Care Manual - Page 28
To check the MAC address, Override Mode, Activating and deactivating Override mode
View all Dacor DRR36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Operations Operations • Temporary Appliance Load Reduction (L4): The refrigerator responds to a TALR signal by aggressively reducing the load for a short time period. This function reduces energy consumption by stopping the compressor and controlling the functions that consume a lot of energy such as the defrost cycle and making ice. - When the refrigerator operates in TALR (L4) mode, turn on the "TALR" icon on the refrigerator display. - TALR (L4) mode is automatically deactivated after it lasts for the received duration (max. 15 minutes), or when the Override key is pressed. The mode is immediately deactivated and the refrigerator returns to the normal state when the door is opened or closed, or the dispenser is used. To check the MAC address 1. In this mode, the MAC address appears on the temperature panel sequentially for 1 minute. Press and hold both Fridge and Filter Reset for 6 seconds. The temperature display blinks. Then, press Control Lock to display the MAC address. The fridge beeps. 2. For example, if the MAC address is "11-22-33-44-55-66", the temperature panel displays the address for 1 minute in this sequence: "--" "11" "22" "33" "44" "55" "66" "--". After the 1 minute, the MAC address disappears and the temperature panel returns to the normal state. NOTE The temperature panel displays "-- / --" for an unknown MAC address or if a Wi-Fi connection is not established or is lost. Override Mode When you want the refrigerator to ignore the SMART GRID (Demand Response) signal from the utility company, you can activate OVERRIDE mode. When you activate OVERRIDE mode, the refrigerator ignores the SMART GRID (Demand Response) signal and is not controlled by the utility company. Activating and deactivating Override mode 1. Press and hold Override for 3 seconds. 2. A chime sounds with a message of 'Or' on the temperature display for 5 seconds. The Override indicator ( ) turns on. 3. If the refrigerator receives a SMART GRID (Demand Response) signal from the utility company, `Or' is displayed in the fridge temperature display. 4. To deactivate OVERRIDE mode, press and hold Override for 3 seconds. 5. A chime sounds with a message of 'Or' on the temperature display for 5 seconds. The Override indicator ( ) turns off. 28 English