Dacor DTF364 Use Care Manuals and Installation Instructions - Page 11

Important

Get Dacor DTF364 PDF manuals and user guides View all Dacor DTF364 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Installation 4. Pull out gently on the right side of the water filter bypass to expose the IMPORTANT handles, as shown below. The water filter must be replaced every 6 5. Remove the water filter bypass by pulling months. See page 18. it outward. Save it in case it is needed in the future. It is normal for a few drops of Enabling Filter Change Indicator water to drip after the bypass has been removed. The filter change indicator is not enabled at the factory. It must be enabled when the filter is installed. 1. Touch Key Lock on the control panel momentarily. 2. With the Key Lock indicator lit, touch and release the following keys in order. ¾¾ Vacation ¾¾ Refrigerator Temperature Set ¾¾ Quick Cool ¾¾ Freezer Temperature Set    6. Remove the plastic wrap from the outside of the filter. 7. Insert the water filter into the mechanism and push back on the right side to lock it in place. 8. Replace the crisper drawers. 9. Connect the power plug to the electrical outlet. 10. Touch the Ice key on the control panel to turn on the ice maker. 3. When the keys are touched in the correct order, the key lock indicator will turn off, and the filter change indicator light will turn on. Filter 4. Touch Filter reset 3" (Key Change Lock) for three seconds to begin calculating the filter usage time automatically. The filter change indicator light will turn off. Repeat the same procedure to disable the filter change indicator light. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
9
Installation
4.
Pull out gently on the right side of
the water filter bypass to expose the
handles, as shown below.
5.
Remove the water filter bypass by pulling
it outward. Save it in case it is needed in
the future. It is normal for a few drops of
water to drip after the bypass has been
removed.
6.
Remove the plastic wrap from the
outside of the filter.
7.
Insert the water filter into the mechanism
and push back on the right side to lock it
in place.
8.
Replace the crisper drawers.
9.
Connect the power plug to the electrical
outlet.
10. Touch the
Ice
key on the control panel to
turn on the ice maker.
IMPORTANT
The water filter must be replaced every 6
months. See page 18.
Enabling Filter Change Indicator
The filter change indicator is not enabled at
the factory. It must be enabled when the filter
is installed.
1.
Touch
Key Lock
on the control panel
momentarily.
2.
With the
Key Lock
indicator lit, touch
and release the following keys in order.
¾
Vacation
¾
Refrigerator Temperature
Set
¾
Quick
Cool
¾
Freezer Temperature
Set
3.
When the keys are touched
in the correct order, the
key lock indicator will turn
off, and the filter change
indicator light will turn on.
4.
Touch
Filter reset 3”
(
Key
Lock
) for three seconds to begin
calculating the filter usage time
automatically. The filter change indicator
light will turn off.
Repeat the same procedure to disable the
filter change indicator light.
Filter
Change